HP LH4r HP Netserver LH 4 User Guide - Page 30
Installing Additional Memory in the LH 4
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 5 NOTE Installing Additional Memory Use only HP DIMMs listed in HP Information Assistant or HP Order Assistant. Installing Additional Memory in the LH 4 1. Turn OFF the NetServer and remove all cables from the rear of the NetServer. Pull both power plugs out. 2. Remove cover 3 and the bezel (see Chapter 3, "Removing and Replacing Covers"). 3. Loosen the memory cage screw, and swing the cover open (see Figure 52). Figure 5-2. Memory Cage 4. Unseat each memory board with the release clips, and remove the two boards (see Figure 5-3). 24
Chapter 5
Installing Additional Memory
24
NOTE
Use only HP DIMMs listed in HP Information Assistant or HP
Order Assistant.
Installing Additional Memory in the LH 4
1.
Turn OFF the NetServer and remove all cables from the rear of the
NetServer. Pull both power plugs out.
2.
Remove cover 3 and the bezel (see Chapter 3, "Removing and Replacing
Covers").
3.
Loosen the memory cage screw, and swing the cover open (see Figure 5-
2).
Figure 5-2. Memory Cage
4.
Unseat each memory board with the release clips, and remove the two
boards (see Figure 5-3).