HP LH4r HP Netserver LH 4 User Guide - Page 79
User Preferences, Setup Utility
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 10 Configuring the NetServer Another utility, DiagTools, provides an easy-to-use hardware diagnostic for system verification, burn-in, and rapid troubleshooting. It must first be copied to diskette and then executed from the diskette. User Preferences User Preferences lets you change the language and the system date and time. You can also change the language of the BIOS. Setup Utility Use the Setup utility to enable or disable the integrated HP NetRAID controller. The HP NetServer LH 4 and LH 4r factory default setting enables the integrated HP NetRAID controller for the SCSI A port, only. For a complete discussion of the HP NetRAID and its channels, see the Integrated HP NetRAID Controller Configuration Guide. CAUTION If you ever use the Setup (F2) utility to reset to system defaults, your HP NetRAID configuration that records which HP NetRAID channels are enabled or disable will also be reset to its default value. If you change the HP NetRAID configuration in the Setup utility and then you reset to system defaults, you must reenable the correct HP NetRAID channels before you exit the Setup utility. 1. Turn ON the power to the NetServer and display monitor. 2. Press the F2 function key when you see the message: Press to enter SETUP 3. If a password has been set, provide it when prompted. 4. When the Setup Utility menu is displayed, the settings for the integrated HP NetRAID controller are: • Integrated HP NetRAID [Enable/Disable] This setting enables or disables the integrated HP NetRAID controller. To use the HP NetRAID controller, this setting is set to Enable. To disable the HP NetRAID controller and leave all drives under SCSI control, set this setting to Disable. 73