HP LH4r HP Netserver LH 4 User Guide - Page 81
ISA Non-Plug-and-Play Boards Optional
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 10 Configuring the NetServer Use the arrow keys to move the cursor, press ENTER to select an option, and press ESC to exit. 1. To change adapter settings: • Select an adapter from the list in the Main Menu • Select "Adapter Setup". This option configures the SCSI ID setting and other advanced adapter settings. 2. To format a hard disk or change hard disk parameters: • Select an adapter from the list in the Main Menu • Select "Device Selections" • Select the hard disk to format • Select "format" menu option For more details, including default settings, refer to Information Assistant on the HP NetServer Online Documentation CD-ROM. ISA Non-Plug-and-Play Boards (Optional) Reserving Resources for ISA Non-Plug-and-Play Boards If you have installed an ISA non-Plug-and Play accessory board, you must reserve system resources for it. Turn on the monitor and the NetServer, and start the Setup utility by pressing the F2 key when Press to enter SETUP appears on the boot screen. NOTE Pressing the F2 key when prompted should start the Setup utility. For some ISA boards, the Setup utility will not start, and you must remove the ISA board, use the Setup utility to reserve system resources for the ISA board, and reinstall the ISA board. Use the Setup utility to allocate system resources to the ISA non-Plug-and-Play accessory board. 75