HP LH4r HP Netserver LH 4 User Guide - Page 61
Lift the NetServer by the handles until the handles are above the extended
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 8 Installing the NetServer in an HP Rack System/E or Rack System/U 3. Extend the slides until you hear a click, indicating they are locked. Note that slides do not come apart. 4. Remove power supplies and hard disk drives from the server to reduce the total weight to be lifted. WARNING Two people are required to move or lift the NetServer. The HP NetServer LH 4r weighs up to 176 pounds (80 kg.) when fully loaded. 5. Lift the NetServer by the handles until the handles are above the extended slide members (see Figure 8-9). 6. Move the NetServer toward the rack, between the slide members, until all four NetServer handles are over the slide members. The NetServer must be slid onto the slides through the handles. You cannot lower it onto the slides. Figure 8-9. Mounting the NetServer on the Slides 55