HP LH4r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 11
Link LED, Steady On, Flashing, LAN Speed Indicator
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 1 Controls, Ports, and Indicators • The two LAN ports (LAN A/MGMT and LAN B) are for embedded controllers based on Intel's 82559 10/100 BaseT Fast Ethernet controller. Only LAN A/MGMT is used with Alert-on-LAN 2 (AOL2) and Wake-onLAN remote management functions. Each one has a RJ-45 LAN connector and two LEDs to indicate LAN speed and valid connection. Refer to Table 13 for the LAN LED indicators and Chapter 10, "Configuring the HP Netserver." • The external SCSI port provides access to external SCSI devices, typically an external SCSI tape back-up device. Power LAN Mouse Parallel A/MGMT LAN B PCI Slot (1) Keyboard Serial A/MGMT Video External SCSI Connector Figure 1-3. Rear Panel and Ports Table 1-3. LAN Port (RJ45) LED Indicators Indicator Definition Link LED This green LED is the activity/link indicator. • Steady On indicates a valid LAN link. • Flashing On indicates there is LAN activity. LAN Speed Indicator This yellow LED is the LAN speed indicator. • Steady Off indicates the LAN is operating at 10 Mbps LAN speed. • Steady On indicates the LAN is operating at 100 Mbps LAN speed. 5