HP LH4r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 47
Removing the Accessory Slot Cover
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 5 Latch Tabs (2) Installing Additional Boards Tab Rest Slot Cover Riser Board Figure 5-4. Removing the Accessory Slot Cover 10. If necessary, remove the riser board from the PCI slot. You may leave the riser board in place with smaller PCI boards, but you will need to remove the riser board from the PCI slot for larger PCI boards. 11. Slide the accessory board into the PCI slot on the riser board as shown in Figure 5-5. 41
Chapter 5
Installing Additional Boards
41
Latch
Tab Rest
Slot Cover
Tabs (2)
Riser
Board
Figure 5-4. Removing the Accessory Slot Cover
10. If necessary, remove the riser board from the PCI slot.
You may leave the riser board in place with smaller PCI boards, but you will need to
remove the riser board from the PCI slot for larger PCI boards.
11. Slide the accessory board into the PCI slot on the riser board as shown in Figure 5-5.