HP LH4r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 89

Connecting the Monitor, Keyboard, Mouse, and UPS, Introduction

Get HP LH4r - NetServer - 256 MB RAM PDF manuals and user guides View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

9 Connecting the Monitor, Keyboard, Mouse, and UPS Introduction Use the procedures listed here to connect the peripheral devices to the HP Netserver LP 1000r. 1. Connect the monitor, keyboard, and mouse to the HP Netserver LP 1000r using the connections provided on the rear of the chassis. See Figure 9-1. When connecting the Netserver to peripherals, use the cable ties and labels provided with the product. NOTE Power The two USB connectors are reserved for printers, scanners, and external modems, but not the keyboard or mouse. Mouse Parallel LAN A/MGMT LAN B PCI Slot (1) Keyboard NOTE Serial A/MGMT Video External SCSI Connector Figure 9-1. Rear Panel Ports If you have a console switch box, refer to the switch box user guide for instructions on connecting the keyboard, mouse, and monitor. CAUTION The Keyboard and Mouse ports are both PS/2 ports, but are not interchangeable. If you plug the keyboard into the Mouse port, or the mouse into the Keyboard port, you will get an error message and the system will not finish the boot process. 2. Connect the power cord to the rear of the Netserver. See Figure 9-1. 3. If LAN cables are needed, you may connect them now or wait until you have verified the Netserver's operation. 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
83
9
Connecting the Monitor, Keyboard,
Mouse, and UPS
Introduction
Use the procedures listed here to connect the peripheral devices to the
HP Netserver LP 1000r.
1. Connect the monitor, keyboard, and mouse to the HP Netserver LP 1000r
using the connections provided on the rear of the chassis. See Figure 9-1.
When connecting the Netserver to peripherals, use the cable ties and labels
provided with the product.
NOTE
The two USB connectors are reserved for printers, scanners,
and external modems, but not the keyboard or mouse.
Power
Mouse
Parallel
LAN A/MGMT
LAN B
PCI Slot (1)
Keyboard
Serial A/MGMT
Video
External
SCSI Connector
Figure 9-1. Rear Panel Ports
NOTE
If you have a console switch box, refer to the switch box user
guide for instructions on connecting the keyboard, mouse, and
monitor.
CAUTION
The Keyboard and Mouse ports are both PS/2 ports, but are
not interchangeable. If you plug the keyboard into the Mouse
port, or the mouse into the Keyboard port, you will get an
error message and the system will not finish the boot process.
2. Connect the power cord to the rear of the Netserver. See Figure 9-1.
3. If LAN cables are needed, you may connect them now or wait until you have
verified the Netserver's operation.