HP LH4r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 61
Step C, Latch, Hook Latch, See
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 6 Installing an Additional Processor c. While holding the heatsink down with one hand, push down with your thumb to hook the tab with the thumb latch. See Figure 6-6. Tool Latch Hold Down Hook Latch Step C Step B Figure 6-6. Setting the Latches CAUTION Failure to re-install the air duct will cause the Netserver to shut down with no messages displayed and possible damage to the processor. 5. Replace the air duct on the system board and tighten the captive screws. See Figure 6-7. 55
Chapter 6
Installing an Additional Processor
55
c.
While holding the heatsink down with one hand, push down with your
thumb to hook the tab with the thumb latch. See Figure 6-6.
Hold
Down
Step C
Tool
Latch
Hook Latch
Step B
Figure 6-6. Setting the Latches
CAUTION
Failure to re-install the air duct will cause the Netserver to
shut down with no messages displayed and possible damage
to the processor.
5. Replace the air duct on the system board and tighten the captive screws.
See Figure 6-7.