HP LaserJet 1020 HP LaserJet 1020 - User Guide - Page 56
Cleaning the pickup roller
View all HP LaserJet 1020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Cleaning the pickup roller If you want to clean the pickup roller rather than replace it, follow the instructions below: 1. Remove the pickup roller as described in steps 1 through 5 of Changing the pickup roller on page 43. 2. Dab a lint-free cloth in isopropyl alcohol, and scrub the roller. WARNING! Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before you close the printer and plug in the power cord, allow the alcohol to dry completely. 3. Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt. 4. Allow the pickup roller to dry completely before you reinstall it in the printer (see Changing the pickup roller on page 43). 46 Chapter 3 Maintenance ENWW
Cleaning the pickup roller
If you want to clean the pickup roller rather than replace it, follow the instructions below:
1.
Remove the pickup roller as described in steps 1 through 5 of
Changing the pickup roller
on page
43
.
2.
Dab a lint-free cloth in isopropyl alcohol, and scrub the roller.
WARNING!
Alcohol is flammable. Keep the alcohol and cloth away from an open flame. Before
you close the printer and plug in the power cord, allow the alcohol to dry completely.
3.
Using a dry, lint-free cloth, wipe the pickup roller to remove loosened dirt.
4.
Allow the pickup roller to dry completely before you reinstall it in the printer (see
Changing the
pickup roller
on page
43
).
46
Chapter 3
Maintenance
ENWW