HP LaserJet Pro CP1525 HP LaserJet Pro CP1520 - User Guide - Page 136

Control panel message Load tray # Status alert Load tray 1 plain Cleaning Page [OK] to start Load tray 1 Magenta Cartridge Low Magenta in wrong position Magenta in wrong position Magenta Very Low Manual duplex Load tray # Press [OK] Manual feed Press [OK] for available media Memory is low Press [OK] 122 Chapter 10 Solve problems Description Recommended action A tray is configured for the paper Load the correct paper into the type and size that the print job is tray, or press OK to use paper in requesting, but that tray is empty. a different tray. The product is ready to process the cleaning operation. Load Tray 1 with plain paper in the size indicated, and then press OK. No trays are configured for the Load the correct paper into paper type and size that the print Tray 1, or press OK to use paper job is requesting. in a different tray. The print cartridge is nearing the Printing can continue, but end of its useful life. consider having a replacement supply on hand. A print cartridge is installed in the incorrect slot. Be sure that each print cartridge is in the correct slot. From front to rear, the print cartridges are installed in this order: black, cyan, magenta, yellow. The print cartridge is installed in the incorrect slot. Make sure that each print cartridge is installed in the correct slot. From front to back, the print cartridges are installed in this order: black, cyan, magenta, and yellow. The print cartridge is at the end of its useful life, and the At Very Low menu item in the System Setup menu is set to Continue. To ensure optimal print quality, HP recommends replacing the print cartridge at this point. You can continue printing until you notice a decrease in print quality. Actual cartridge life may vary. Once an HP supply has reached "very low", HP's premium Protection Warranty on that supply has ended. All print defects or cartridge failures incurred when an HP supply is used in continue at very low mode will not be considered to be defects in materials or workmanship in the supply under the HP Print Cartridge Warranty Statement. The first side of a manual duplex job has printed, and the page needs to be loaded to process the second side. Load the page in the indicated tray with the side to be printed face up, and the top of the page away from you and then press OK. The product is set for manual feed mode. Press OK to clear the message or load the correct paper into Tray 1. The product memory is almost full. Press OK to finish the job, or press X to cancel the job. Break the job into smaller jobs that contain fewer pages. ENWW