HP LaserJet Pro CP1525 HP LaserJet Pro CP1520 - User Guide - Page 30

Network Setup menu

Page 30 highlights

Network Setup menu Use this menu to establish network configuration settings. Menu item Sub-menu item Wireless Menu (wireless products WPS Setup only) Run Network Test TCP IP config Turn Wireless On/Off Automatic Manual Auto Crossover Network services On Off IPv4 IPv6 Show IP Address Link Speed Restore defaults No Yes Automatic (Default) 10T Full 10T Half 100TX Full 100TX Half Description If your wireless router supports this feature, use this method to set up the product on a wireless network. This is the simplest method. Tests the wireless network and prints a report with the results. Enable or disable the wireless network feature. Select Automatic to automatically configure all the TCP/IP settings. Select Manual to manually configure the IP address, subnet mask, and default gateway. The default setting is Automatic. This item is used when you are connecting the product directly to a personal computer using an Ethernet cable (you might have to set this to On or Off depending on the computer being used). The default setting is On. This item is used by the network administrator to limit the network services available on this product. On Off The default setting is On. No: The product IP address will not appear on the control panel display. Yes: The product IP address will appear on the control panel display. The default setting is No. Sets the link speed manually if needed. After setting the link speed, the product automatically restarts. Press OK to restore the network configuration settings to the default values. 16 Chapter 2 Control panel menus ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202

Network Setup menu
Use this menu to establish network configuration settings.
Menu item
Sub-menu item
Description
Wireless Menu
(wireless products
only)
WPS Setup
If your wireless router supports this feature, use this
method to set up the product on a wireless network.
This is the simplest method.
Run Network Test
Tests the wireless network and prints a report with the
results.
Turn Wireless On/Off
Enable or disable the wireless network feature.
TCP IP config
Automatic
Manual
Select
Automatic
to automatically configure all the
TCP/IP settings.
Select
Manual
to manually configure the IP address,
subnet mask, and default gateway.
The default setting is
Automatic
.
Auto Crossover
On
Off
This item is used when you are connecting the
product directly to a personal computer using an
Ethernet cable (you might have to set this to
On
or
Off
depending on the computer being used).
The default setting is
On
.
Network services
IPv4
IPv6
This item is used by the network administrator to limit
the network services available on this product.
On
Off
The default setting is
On
.
Show IP Address
No
Yes
No
: The product IP address will not appear on the
control panel display.
Yes
: The product IP address will appear on the
control panel display.
The default setting is
No
.
Link Speed
Automatic
(Default)
10T Full
10T Half
100TX Full
100TX Half
Sets the link speed manually if needed.
After setting the link speed, the product automatically
restarts.
Restore defaults
Press
OK
to restore the network configuration
settings to the default values.
16
Chapter 2
Control panel menus
ENWW