HP LaserJet Pro MFP 3101-3108fdn User Guide - Page 89
Assign or change the system password using the Embedded Web Server
View all HP LaserJet Pro MFP 3101-3108fdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
4. Click IPv4 Configuration and make the necessary changes. 5. Click Apply. Assign or change the system password using the Embedded Web Server Assign an administrator password for access to the printer and the HP Embedded Web Server so that unauthorized users cannot change the printer settings. 1. Open the EWS. See Configure the printer using the Embedded Web Server (EWS). 2. Click Settings tab. 3. From the left menu, click Security. 4. Click Password Settings and make the necessary changes. 5. Click Apply. NOTE: Make note of the password and store it in a safe place. Change energy-conservation settings The printer includes several economic features to conserve energy and supplies. Set the Sleep Mode time Use the EWS to set the amount of idle time before the printer enters sleep mode. 1. Open the EWS. See Configure the printer using the Embedded Web Server (EWS). 2. Click the Settings tab. 3. From the left menu, click Power Management. 4. Click Sleep Mode and select the desired time. 5. Click Apply. Change the printer shutdown time and settings Use the EWS to set the amount of time before the printer shuts down. 1. Open the EWS. See Configure the printer using the Embedded Web Server (EWS). 2. Click the Settings tab. 3. From the left menu, click Power Management. 4. Click Shutdown Mode and select the desired time. 5. Select or clear the option to delay the shutdown. NOTE: ● When this option is selected the printer will not shut down unless all ports are inactive. An active network link will prevent the printer from shutting down. 78 Chapter 7 Configure your printer