HP Officejet 6000 User Guide - Page 68
Large Black Font Text, The type should - no black
View all HP Officejet 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Chapter 5 If the color of any of the bars is not uniform, follow these steps: 1. If the printer was recently transported at a high altitude, try a printhead cleaning. 2. If the printer was not recently transported, try printing another Print Quality Diagnostic report. This will use less ink than a printhead cleaning, but if it is not effective, try a cleaning. 3. Retry the Print Quality Diagnostic report. If the colors seem to be improving, continue cleaning. If the colors get worse, contact HP - the printhead may need to be replaced. Large Black Font Text Look at the large-font text above the color blocks. I ABCDEFG abcdefg The type should be sharp and clear. If the type is jagged, try aligning the printer. If there are streaks or smears of ink, clean the printhead. Example of good Large-Font Type The letters are sharp and clear - the printer is operating correctly. Example of bad Large-Font Type The letters are jagged - align the printer. Example of bad Large-Font Type The letters are smeared - clean the printhead and check if the paper is curled. To avoid curl, store all paper flat in a resealable bag. Example of bad Large-Font Type The letters are ragged on one end - clean the printer. If this defect occurs right after a new cartridge is installed, the printer's automatic servicing routines may solve the problem in a day or so, using less ink than a printhead cleaning. 64 Maintain and troubleshoot