HP P2015 HP LaserJet P2015 - Software Technical Reference - Page 73

Software description The following options are available on the SNMP screen: ● Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the printer. Custom community names can be configured to control management access to the HP LaserJet P2015 printer. ◦ Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the printer. ◦ Confirm Set Community name: Retype the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the printer. ◦ Get Community name: Type the SNMP Get Community Name (password) to allow SNMP information to be read from the printer. ◦ Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow SNMP information to be read from the printer. ◦ Disable SNMP v1 default Get Community name of "public". Select this option to disable the default Get community name "public". If you select this option, type the appropriate values into the Get Community name and Confirm Get Community name fields. ● Enable SNMP v1 read-only access (uses "public" for the Get Community value). Select this option to enable the SNMP V1 agents on the HP LaserJet P2015 printer, but limit access to readonly. Write-access is disabled. The default Get Community name "public" is automatically enabled. ● Disable SNMP v1. Select this option to disable the SNMP V1 agents on the HP LaserJet P2015 printer, which is recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery utilities might not operate properly. NOTE: Click Apply to make the changes take effect. ENWW HP ToolboxFX 55