HP PageWide Pro 452dw User Guide - Page 20
Supported network protocols, Connect the product using a wired network
View all HP PageWide Pro 452dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Supported network protocols HP PageWide Pro 452 products support the following network protocols. ● TCP/IPv4 ● IPv6 ● DHCP, AutoIP ● DHCP v6 ● HTTP server, HTTP client ● SMTP client for alerts ● SNMP v1 ● Open_ssl library ● Bonjour ● gSOAP ● SAND box ● LPD ● Bootp, Bootp TCE improvement ● Netbios ● WINS ● LLMNR ● CIFS v6 Connect the product using a wired network Use this procedure to install the product on a wired network using Windows. 1. Connect the Ethernet cable to the Ethernet port (1) and to the network. 2. Turn the product on. 3. Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product. 4. On the control panel home screen, select Network (using the or button, if needed), and press OK. 5. Select Ethernet Settings, and press OK. 6. Select View Ethernet Details, and press OK. 7. Press (Print) to print a page with the IP address. Connect the product using a wireless network (wireless models only) You can connect the product to a wireless network using one of the following methods. ● To connect the product to a wireless network using the Wireless Setup Wizard ● To connect the product to a wireless network using WPS ● To connect the product to a wireless network manually If your wireless router does not support Wi-Fi Protected Setup (WPS), obtain the wireless router network settings from your system administrator, or complete the following tasks. 10 Chapter 2 Connect the product ENWW