HP Pavilion dm4-3000 HP Pavilion dm4 Entertainment PC - Maintenance and Servic - Page 57

use only with non-Beats Edition computer models., Remove the two Phillips PM2.5×6.6 screws

Get HP Pavilion dm4-3000 PDF manuals and user guides View all HP Pavilion dm4-3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Description 500-GB, 5400-rpm, 9.5-mm 320-GB, 7200-rpm, 9.5-mm 320-GB, 7200-rpm, 7.0-mm 320-GB, 5400-rpm, 7.0-mm Spare part number 669299-001 634862-001 641672-001 645193-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 41). Remove the hard drive: 1. Loosen the captive screw (1) that secures the hard drive cover to the computer. 2. Remove the hard drive cover (2). The hard drive cover is available in the Plastics Kit, spare part numbers 671170-001 (for use only with Beats Edition computer models) and 669075-001 (for use only with non-Beats Edition computer models). 3. Remove the two Phillips PM2.5×6.6 screws (1) and the Phillips PM2.5×4.5 screw (2) that secure the hard drive to the computer. 4. Disconnect the hard drive cable (3) from the system board. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
Description
Spare part number
500-GB, 5400-rpm, 9.5-mm
669299-001
320-GB, 7200-rpm, 9.5-mm
634862-001
320-GB, 7200-rpm, 7.0-mm
641672-001
320-GB, 5400-rpm, 7.0-mm
645193-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
39
).
5.
Remove the memory module/wireless module compartment cover (see
WLAN module
on page
41
).
Remove the hard drive:
1.
Loosen the captive screw
(1)
that secures the hard drive cover to the computer.
2.
Remove the hard drive cover
(2)
. The hard drive cover is available in the Plastics Kit, spare part
numbers 671170-001 (for use only with Beats Edition computer models) and 669075-001 (for
use only with non-Beats Edition computer models).
3.
Remove the two Phillips PM2.5×6.6 screws
(1)
and the Phillips PM2.5×4.5 screw
(2)
that secure
the hard drive to the computer.
4.
Disconnect the hard drive cable
(3)
from the system board.
Component replacement procedures
49