HP Pavilion dm4-3000 HP Pavilion dm4 Entertainment PC - Maintenance and Servic - Page 94
Optical drive connector cable, System board see
View all HP Pavilion dm4-3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Optical drive connector cable NOTE: The optical drive connector cable is included in the Optical Drive Hardware Kit, spare part numbers 670734-001 (for use only with Beats Edition computer models) and 670735-001 (for use only with non-Beats Edition computer models). Before removing the optical drive connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39), and then remove the following components: a. Optical drive (see Optical drive on page 46) b. Hard drive (see Hard drive on page 48) c. Keyboard (see Keyboard on page 57) d. Top cover (see Top cover on page 60) e. System board (see System board on page 76) Remove the optical drive connector cable: 1. Remove the two Phillips PM2.5×4.5 screws (1) that secure the optical drive connector to the base enclosure. 2. Release the optical drive connector cable from the clips (2) built into the base enclosure. 86 Chapter 4 Removal and replacement procedures