HP Pavilion g4-1000 HP G4 Notebook PC - Maintenance and Service Guide - Page 53

Hard drive, Remove the service cover see

Get HP Pavilion g4-1000 PDF manuals and user guides View all HP Pavilion g4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

9. Remove the optical drive bracket (2). Reverse this procedure to reassemble and install the optical drive. Hard drive NOTE: The hard drive spare part kit does not include the hard drive cable, hard drive isolators, or Mylar shield. The hard drive isolators and Mylar shield are included in the Hard Drive Hardware Kit, spare part number 639444-001. The hard drive cable is included in the Cable Kit, spare part number 639442-001. Description 750-GB, 5400-rpm 640-GB, 5400-rpm 500-GB, 7200-rpm 320-GB, 7200-rpm 320-GB, 5400-rpm 250-GB, 7200-rpm Spare part number 644351-001 637312-001 644685-001 645089-001 645086-001 645091-001 Before removing the mass storage device, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the service cover (see Optical drive on page 43). Remove the hard drive: 1. Disconnect the hard drive cable (1) from the system board. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
9.
Remove the optical drive bracket
(2)
.
Reverse this procedure to reassemble and install the optical drive.
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive cable, hard drive isolators, or
Mylar shield. The hard drive isolators and Mylar shield are included in the Hard Drive Hardware Kit,
spare part number 639444-001. The hard drive cable is included in the Cable Kit, spare part number
639442-001.
Description
Spare part number
750-GB, 5400-rpm
644351-001
640-GB, 5400-rpm
637312-001
500-GB, 7200-rpm
644685-001
320-GB, 7200-rpm
645089-001
320-GB, 5400-rpm
645086-001
250-GB, 7200-rpm
645091-001
Before removing the mass storage device, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
42
).
5.
Remove the service cover (see
Optical drive
on page
43
).
Remove the hard drive:
1.
Disconnect the hard drive cable
(1)
from the system board.
Component replacement procedures
45