HP Pavilion g4-1000 HP G4 Notebook PC - Maintenance and Service Guide - Page 67
TouchPad LED board, Optical drive see
View all HP Pavilion g4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
5. Remove the TouchPad button board (4) and cable. Reverse this procedure to install the TouchPad button board and cable. TouchPad LED board Description TouchPad LED board (includes cable) Spare part number 640292-001 Before removing the TouchPad LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: ● Optical drive (see Optical drive on page 43) ● Hard drive (see Hard drive on page 45) ● Keyboard (see Keyboard on page 50) ● Top cover (see Top cover on page 53) Component replacement procedures 59