HP Pavilion g4-1000 HP G4 Notebook PC - Maintenance and Service Guide - Page 90
Release the wireless antenna cables, Remove the display assembly
View all HP Pavilion g4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: ● Optical drive (see Optical drive on page 43) ● Hard drive (see Hard drive on page 45) ● WLAN module (see WLAN module on page 48) ● Keyboard (see Keyboard on page 50) ● Top cover (see Top cover on page 53) Remove the display assembly: 1. Disconnect the display panel cable (1) from the system board. 2. Release the wireless antenna cables (2) from the clips and the opening in the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 3. Remove the four Phillips PM2.5×6.0 screws (3) that secure the display assembly to the computer. 82 Chapter 4 Removal and replacement procedures