HP Pavilion g4-1000 HP G4 Notebook PC - Maintenance and Service Guide - Page 88
LED board
View all HP Pavilion g4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
LED board Description LED board Spare part number 640293-001 Before removing the LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: ● Optical drive (see Optical drive on page 43) ● Hard drive (see Hard drive on page 45) ● WLAN module (see WLAN module on page 48) ● Keyboard (see Keyboard on page 50) ● Top cover (see Top cover on page 53) ● System board (see System board on page 67) Remove the LED board: 1. Release the clips (1) built into the base enclosure that secure the LED board. 2. Release the LED board cable (2) from the base enclosure. (The LED board cable is attached to the base enclosure with double-sided tape.) 80 Chapter 4 Removal and replacement procedures