HP Pavilion g4-1000 HP G4 Notebook PC - Maintenance and Service Guide - Page 65
Power button board, Remove the Phillips PM2.0×3.0 screw
View all HP Pavilion g4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Power button board Description Power button board (includes cable) Spare part number 639451-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), and then remove the following components: ● Optical drive (see Optical drive on page 43) ● Hard drive (see Hard drive on page 45) ● Keyboard (see Keyboard on page 50) ● Top cover (see Top cover on page 53) Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the top cover. 3. Remove the power button board and cable (2). Reverse this procedure to install the power button board. Component replacement procedures 57