HP Pavilion zt1100 HP Pavilion Notebook PC ZE1000 Series - Reference Guide - Page 72
To remove a RAM expansion module
View all HP Pavilion zt1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Add-On Devices Installing Additional RAM To remove a RAM expansion module 1. Turn off the notebook: click Start, Turn Off Computer, Turn Off. 2. Important: unplug the AC adapter (if present) and remove the notebook's battery. 3. On the bottom of the notebook, loosen the screw holding the RAM cover (the cover retains the screw), and remove the cover. 4. Release the two latches at the sides of the RAM expansion module by pushing them gently outward (away from the sides of the module). When you release the latches, the free edge of the module pops up. Important 5. Pull the module out of the connector. The notebook will not operate without at least one RAM module installed. 6. Replace the RAM cover. 7. Reinstall the notebook's battery. 72 Reference Guide