HP StorageWorks MSA1510i HP Storage Management Utility user guide (383075-002, - Page 15
Accessing the SMU
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Accessing the SMU 1. Install, connect, and apply power to the storage and other network devices, as detailed in your system user documentation. 2. Obtain and record the IP address assigned to the primary management port (MA0). (Worksheets may be provided with you system installation instructions.) To determine the IP address, press the arrow buttons on the front of the array controller and scroll through the messages until the following message is displayed on the controller LCD panel: 603 Port MA0 IP NOTE: • If the IP address message is not displayed on the LCD panel, an IP address was not assigned to the management port. Check the cable connections, view the module LEDs, and read the system installation, maintenance and service, or other user documents for troubleshooting information. • If necessary, you can change the management IP address through the controller LCD panel management menu. For more information, see "Changing the management port IP address through the MSA1510i controller display panel" on page 16. 3. From a server or workstation with access to the storage device, open your Web browser and enter the address obtained in Step 2. For example: http://10.10.1.254 NOTE: For additional security (at a reduced performance level), access the SMU using the secure mode. For example: https://10.10.1.254 4. Enter the username and password. Default settings are: • Username: root • Password: root HP Storage Management Utility user guide 15