HP StorageWorks MSA1510i HP Storage Management Utility user guide (383075-002, - Page 49
Adding authorized initiators, Sample system con, guration-after con, guring targets
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Figure 12 Sample system configuration-after configuring targets NOTE: Figure 12 illustrates the following for Target 1: • One logical drive (Logical Drive 1) is mapped to this target. • Primary and redundant paths are defined for this target: • Portal Group "pg1" uses two portals on data port SA0 of the primary Ethernet iSCSI module. • Portal Group "pg2" uses two portals on data port SB0 of the redundant Ethernet iSCSI module. Adding authorized initiators 1. Select Storage System > Add iSCSI Initiator. HP Storage Management Utility user guide 49
Figure 12 Sample system con
fi
guration—after con
fi
guring targets
NOTE:
Figure 12
illustrates the following for Target 1:
•
One logical drive (Logical Drive 1) is mapped to this target.
•
Primary and redundant paths are de
fi
ned for this target:
•
Portal Group “pg1” uses two portals on data port SA0 of the primary Ethernet iSCSI module.
•
Portal Group “pg2” uses two portals on data port SB0 of the redundant Ethernet iSCSI module.
Adding authorized initiators
1.
Select
Storage System
>
Add iSCSI Initiator
.
HP Storage Management Utility user guide
49