HP StorageWorks MSA1510i HP Storage Management Utility user guide (383075-002, - Page 16
Changing the management port IP address through theMSA1510i controller display panel, guration
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
5. Wait a few moments for the utility to load. NOTE: When accessing the SMU for the first time, a window is displayed requiring input of a user-defined username and password. 6. One of the following happens: • If key components of the system are unconfigured, a prompt to go to the Wizard tab is displayed. (For more information, see "Wizards" on page 69.) • If the system is partially configured, the Configure tab is displayed. (For more information, see "Configure" on page 25.) • If the system is configured, the View tab is displayed. (For more information, see "Diagnose" on page 77.) Changing the management port IP address through the MSA1510i controller display panel When the MSA1510i is initially installed and powered on, an IP address is automatically assigned to the primary management port (usually MA0). Depending on your network configuration, this default IP address may not be accessible by the network servers. To change the IP address of the MSA1510i management port to be in the same LAN segment as the network servers, do the following: 1. Access the controller LCD panel management menu. Press the right (>) navigation button on the front of the active controller (usually the front-right controller.) Network Settings should be displayed and blinking. LCD panel navigation buttons work as follows: Navigation button In the menu Within a menu option Right (>) Select a blinking menu option. When changing IP address settings, move to the next digit. Up/Down (^/v) Scroll through the menu options. Change/Toggle a setting. Left (