HP StorageWorks MSA1510i HP Storage Management Utility user guide (383075-002, - Page 30

Sample configuration used in this document Illustrations in this document demonstrate the process of configuring a dual-controller MSA1510i storage system, with multiple targets being accessed by multiple initiators. Although each real-world environment and the associated configuration steps will differ from this example, fundamental principles of the configuration steps are the same for all installations. Your configuration may be more or less complex, but the configuration steps will be similar to the steps outlined in this document. The following diagrams illustrate the sample configuration used throughout this document: • Sample configuration-Device and cabling diagram • Sample configuration-physical-to-logical storage diagram • Sample configuration-Path/accessibility diagram Sample configuration-Device and cabling diagram 5 6 7 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 15K 3 4 1 2 Item 1 MSA1510i controller shelf 2 MSA20 SATA storage enclosure 3 Primary Ethernet network switch 4 Redundant Ethernet network switch 5 Initiator A 6 Initiator B 7 Initiator C 15292 Description Sample includes two array controllers and two 2-Port Ethernet iSCSI modules. Sample includes twelve SATA hard drives. Sample supports 100/1000BaseT functionality. Sample supports 100/1000BaseT functionality. Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two network switches. Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two network switches. Sample includes two 100/1000BaseT Ethernet NICs and cabling to the two network switches. 30 Configure