HP StorageWorks MSA1510i HP Storage Management Utility user guide (383075-002, - Page 50
guration status - after adding initiators
View all HP StorageWorks MSA1510i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
2. Enter the requested information for the iSCSI initiator. NOTE: • The iSCSI Initiator Name is assigned when defining the initiator on the server, and is usually in the format of "iqn.xxx". Obtain initiator names from your network administrator or as displayed in the iSCSI initiator software on the server. • Be sure to enter the iSCSI Initiator Name exactly as assigned in the iSCSI initiator software on the server. Include all special characters, including periods, and spaces. If the initiator name is entered incorrectly, the target cannot be presented to the initiator. • The system suggests a default value for the iSCSI Initiator Name Alias. Accept the default or enter a user-defined, descriptive value. • Expand the iSCSI Initiator Profile Name drop-down box to identify the operating system of this initiator. Configuration status - after adding initiators Figure 13 illustrates a completed configuration: • Management port MA0 and MB0 • Data ports SA0, SA1, SB0, and SB1 • Physical hard drives, into arrays and logical drives • Targets • Initiators • Initiator 1 • Initiator 2 • Initiator 3 50 Configure