HP Surestore Tape Library Model 2/15 HP DLT Tape Library 15-Slot - (English) U - Page 36
Routing SCSI and Power Cables on Rack Mounted, Libraries
![]() |
View all HP Surestore Tape Library Model 2/15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CAUTION Figure 2-2 Library Installation Step 6: Connect Library to Host Routing SCSI and Power Cables on Rack Mounted Libraries SCSI and power cables must be routed and secured properly on rack mounted libraries. Failure to properly route library cables could result in damage to the cables. To properly route and secure rack mounted library power and SCSI cables: 1. Route the SCSI/power cables through the strain relief bracket: a. Squeeze the two plastic ends of the cable strain relief bracket together. b. Pull off the plastic strain relief clamp. c. Route the SCSI cable(s) and the power cord through the cable strain relief bracket. d. Slide the strain relief clamp back onto the bracket. e. Attach a cable tie (included in the rack mount kit) to the SCSI and power cables about eight inches back from the strain relief bracket. f. Attach another cable tie about eight inches back from the first cable tie. SCSI/Power Cables and Strain Relief Bracket 2-10
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-215-hp-dlt-tape-library-15slot-english-user039s-guide-6c66723/36.png)