HP Surestore Tape Library Model 2/15 HP DLT Tape Library 15-Slot - (English) U - Page 93
Resolving Other Problems, Empty Picker, Vertical, Encoder, Rezero, Position To, Element, Move Medium
![]() |
View all HP Surestore Tape Library Model 2/15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Library Operation Troubleshooting Table 4-10 Robotics Controller Expert Tool Commands (Continued) Category Tests (continued) Utility Options Command Effect EMPTY PICKER Unloads the picker. The cartridge is returned to its home location if it is known, otherwise to the first available empty slot. VERTICAL ENCODER Moves the picker up and down its full course of travel. REZERO Initialize robotics controller. POSITION TO ELEMENT Position picker in front of a selected slot. MOVE MEDIUM Move medium from a selected source slot to a selected destination slot. EXCHANGE MEDIUM Exchange medium between two selected slots. INITIALIZE Inventories the library to determine the location of tape ELEMENT STATUS cartridges. DRIVE STATUS For use with on-line drive repair. Gets and sets the status of drives in the library. DISPLAY FORMAT Allows data to display as either raw hex, decoded formatted text, or both. NOTE Resolving Other Problems This section provides information on solutions to problems that may occur in the operation of the library. Table 4-11 on page 4-44 lists steps to take before consulting a service representative. If a service call is needed, write down the library serial number before calling. The serial number is located on a label towards the bottom of the library on the library rear panel. For problems that may be related to the computer, refer to the host computer system documentation or library application software instructions. Library Operation 4-43
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-215-hp-dlt-tape-library-15slot-english-user039s-guide-6c66723/93.png)