HP Surestore Tape Library Model 2/15 HP DLT Tape Library 15-Slot - (English) U - Page 74
Setting Configuration Options, 2 ADMIN* PSWD 000 000 000 CONFIG, ADMIN, CONFIG, OPTION SAVED
![]() |
View all HP Surestore Tape Library Model 2/15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Library Operation Setting Configuration Options Setting Configuration Options 1 2 © ADMIN* © PSWD 000 000 000 © CONFIG* Set certain options, called configurations, to customize the way the library operates. To change a configuration: 1. Verify that the drive status displays (if not, press CANCEL until it does). 2. Press NEXT until ADMIN* displays, then press ENTER. 3. Enter the three-part numerical password (see "Entering the Administration Menu Password" on page 4-7). 4. INFO* displays. Press NEXT until CONFIG* displays, then press ENTER. 5. Press NEXT or PREV until the name of the configuration to set displays, then press ENTER. If the configuration has multiple settings, the current setting flashes. Otherwise, the configuration option is set and a confirmation message displays. (Configuration options are described on the following pages.) If the current configuration setting is flashing, press NEXT or PREV until the desired setting displays, then press ENTER. OPTION SAVED displays. 6. Press CANCEL to return to the drive status ("ready" state). 4-24
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-215-hp-dlt-tape-library-15slot-english-user039s-guide-6c66723/74.png)