HP Xw6200 Setup and Troubleshooting Guide - Page 8

Ventilation, COA Label, and Serial Number Label Information, exceed 35°C 95°F.

Get HP Xw6200 - Workstation - 2 GB RAM PDF manuals and user guides
UPC - 882780333536
View all HP Xw6200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Ventilation, COA Label, and Serial Number Label Information Proper ventilation for your system is very important. Refer to the notes and illustrations below to properly position your system for maximum airflow. ● Operate the computer on a sturdy, level surface. ● Place the computer in an area that is relatively cool with adequate ventilation. Provide at least 6 inches of clearance at the front and back of the workstation. For cabinet installation, ensure adequate cabinet ventilation and ensure that the ambient temperature within the cabinet does not exceed 35°C (95°F). ● Never restrict the incoming or outgoing airflow of the computer by blocking any vents or air intakes. Figure 2-2 Workstation ventilation Each HP Workstation has two unique serial number labels 1 and a Certificate of Authentication (COA) label 2 (for Windows-preinstalled systems only) as shown in the pictures above. In general, the serial number labels can be found on the top panel or on the side of the unit and at the rear of the unit. Keep this number available when contacting customer service for assistance. The COA label is generally located on the top panel or side of the unit near the serial number label. NOTE If you must restore the operating system with Windows OEM CDs (installing without using the Restore Plus! CDs), you will need to call Microsoft in order to provide the company with a Stock Keeping Unit (SKU) number. The SKU information is on the service tag and is the OS product number in the lower right hand section of the tag. It should say "OS: XXXXXXX" where the "XXXXXXX" is the OS product number. 4 Chapter 2 Hardware Setup ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Ventilation, COA Label, and Serial Number Label Information
Proper ventilation for your system is very important. Refer to the notes and illustrations below to properly
position your system for maximum airflow.
●
Operate the computer on a sturdy, level surface.
●
Place the computer in an area that is relatively cool with adequate ventilation. Provide at least 6
inches of clearance at the front and back of the workstation. For cabinet installation, ensure
adequate cabinet ventilation and ensure that the ambient temperature within the cabinet does not
exceed 35°C (95°F).
●
Never restrict the incoming or outgoing airflow of the computer by blocking any vents or air intakes.
Figure 2-2
Workstation ventilation
Each HP Workstation has two unique serial number labels
1
and a Certificate of Authentication (COA)
label
2
(for Windows-preinstalled systems only) as shown in the pictures above. In general, the serial
number labels can be found on the top panel or on the side of the unit and at the rear of the unit. Keep
this number available when contacting customer service for assistance. The COA label is generally
located on the top panel or side of the unit near the serial number label.
NOTE
If you must restore the operating system with Windows OEM CDs (installing without
using the
Restore Plus!
CDs), you will need to call Microsoft in order to provide the company with
a Stock Keeping Unit (SKU) number. The SKU information is on the service tag and is the OS
product number in the lower right hand section of the tag. It should say “OS: XXXXXXX” where
the “XXXXXXX” is the OS product number.
4
Chapter 2
Hardware Setup
ENWW