HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 25
Preparing to Roll Off the Pallet
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Step 6. Remove the six bolts from the base attaching the rack to the pallet. Figure 2-3 Preparing to Roll Off the Pallet Installation Receiving the Server Cabinet WARNING Use caution when rolling the cabinet off the ramp. A single 4-cell server in the cabinet weighs approximately 400 lb. To avoid a safety hazard, be sure that the leveling feet on the cabinet are raised before you roll the cabinet down the ramp, and any time you roll the cabinet on the casters. It is strongly recommended that two people control rolling the cabinet off the pallet. Step 7. Attach the ramps to the pallet. Step 8. Carefully roll the cabinet down the ramps. Step 9. Position cabinet in final location. Step 10. Remove pallet , ramps and any other packing material from work area. Chapter 2 25