HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 64
Front Panel Display, Standby Power, MP Present
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Installation Cabling and Power Up 1. Apply power to the server cabinet. Apply power to any other server cabinets that were shipped to the customer site. On the front of the server, a solid green Standby Power, and a solid green MP Present light will illuminate after about 30 seconds. Figure 2-28 Front Panel Display RUN Attention Fault Remote MP Present Standby Power Power Power Switch 2. Check the BPS LED for each BPS. See Figure 2-29 on page 65 for the LED location. When on, the breakers distribute power to the BPS. AC power is present at the BPS: • When power is first applied. Observe the BPS LEDs will be flashing amber. • After 30 seconds have elapsed. Observe the flashing amber BPS LED for each BPS becomes a flashing green LED. 64 Chapter 2