HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 34
Removal of Cushion from Front Edge of Server, Step 5.
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Installation Wheel Kit Installation Step 5. Remove the lower front cushion only. Do not remove any other cushions until further instructed. Figure 2-8Removal of Cushion from Front Edge of Server Rear Cushion Side Cushion Front Cushion Step 6. Referencing Table 2-1, locate the two front casters. The two front casters are shorter in length than the two rear casters. Each front caster is designed to fit only on one corner of the server. There is a right front caster and a left front caster. See Figure 2-9 on page 35 and Figure 2-12 on page 38 to identify front and rear casters. 34 Chapter 2
Chapter 2
Installation
Wheel Kit Installation
34
Step 5.
Remove the lower front cushion only. Do not remove any other cushions until further instructed.
Figure 2-8Removal of Cushion from Front Edge of Server
Step 6.
Referencing Table 2-1, locate the two front casters. The two front casters are shorter in length than
the two rear casters. Each front caster is designed to fit only on one corner of the server. There is a
right front caster and a left front caster. See Figure 2-9 on page 35 and Figure 2-12 on page 38 to
identify front and rear casters.
Rear Cushion
Side Cushion
Front Cushion