HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 66

Configuring LAN Information for the MP, MP Main Menu

Get HP rp8420 PDF manuals and user guides View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Installation Cabling and Power Up Figure 2-30 MP Main Menu Configuring LAN Information for the MP This section describes how to set and verify the server MP LAN port information. LAN information includes the MP network name, the MP IP address, the subnet mask, and gateway address. This information is provided by the customer. To set the MP LAN IP address: 1. At the MP Main Menu prompt (MP>), enter cm. From the MP Command Menu prompt (MP:CM>), enter lc (for LAN configuration). The screen displays the default values and asks if you want to modify them. Write down the information or log it to a file, as it might be required for future troubleshooting. NOTE If the Command Menu is not shown, enter q to return to the MP Main Menu, then enter cm. 66 Chapter 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Chapter 2
Installation
Cabling and Power Up
66
Figure 2-30 MP Main Menu
Configuring LAN Information for the MP
This section describes how to set and verify the server MP LAN port information. LAN information includes
the MP network name, the MP IP address, the subnet mask, and gateway address. This information is
provided by the customer.
To set the MP LAN IP address:
1. At the MP Main Menu prompt (
MP>
), enter
cm.
From the MP Command Menu prompt (
MP:CM>
), enter
lc
(for LAN configuration).
The screen displays the default values and asks if you want to modify them. Write down the information
or log it to a file, as it might be required for future troubleshooting.
NOTE
If the Command Menu is not shown, enter
q
to return to the MP Main Menu, then enter
cm
.