HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 49
PCI I/O Slot Details, Step 6.
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installation Installing Accessories CAUTION Working out of sequence or not completing the actions within each step could cause the system to crash. Do not press the attention button until the latch is locked. Step 6. Press the attention button. The green power LED will start to blink. Figure 2-18 PCI I/O Slot Details Manual Release Latch Closed Manual Release Latch Open Attention Button Power LED (Green) Attention LED (Yellow) Step 7. Wait for the green power LED to stop blinking and remain solid green. Step 8. Check for errors in the hotplugd daemon log file (default: /var/adm/hotplugd.log). The critical resource analysis (CRA) performed while doing an attention button initiated add action is very restrictive and the action will not complete-it will fail-to protect critical resources from being impacted. For finer control over CRA actions use pdweb or the olrad command. Refer to the Interface Card OL* Support Guide located on the Web at http://docs.hp.com for details. Step 9. Replace the top cover. Step 10. Connect all cables to the installed PCI card. Chapter 2 49