HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 27

Installation Stand Alone and To Be Racked Systems Stand Alone and To Be Racked Systems Servers shipped as a stand-alone or to be racked configuration must have the core I/O handles and the PCI towel bars attached at system installation. Obtain and install the core I/O handles and PCI towel bars from the accessory kit A6093-04046. The towel bars and handles are the same part. Refer to service note A6093A-11. This is the same accessory kit used for the HP 9000 rp8400 server. Rack Mount System Installation There are several documents written to help with rack mounting the server. This list is intended to guide the HP Installation Specialist to the documentation that has been written by the Rack Solutions team. The external Web site is http://www.hp.com/racksolutions. The internal Web site is http://racksolutions.corp.hp.com. Rack System/E Detailed rack information for the rack system/E covers the following topics: • Safety and Regulatory Information • Description of the Standard Racks and Physical Specifications • Installation Guidelines • Procedures The part number for this user's manual is 5967-6409. Rack System/E Stabilizer Feet The stabilizer installation guide for the rack system/E covers the following topics: • How to Install the Stabilizers • Moving the Rack The part number for this installation guide is A5805-96001. HP J1528A Rack Integration Kit The rack integration kit information covers installing the following products: • Ballast Kit (J1479A) • Anti-Tip Stabilizer Kit (A5540A) • Slide Rails • Cable Management Arm (CMA) • Interlock Device Assembly This installation guide provides a complete parts list of the hardware and tools required to perform the installation of the products mentioned. Installation of the products is illustrated in this guide. The part number for this installation guide is J1528-90001. Chapter 2 27