HP rp8420 Installation Guide, Fifth Edition - HP 9000 rp8420 Server - Page 32
Wheel Kit Installation, Table 2-1, Wheel Kit Packing List
View all HP rp8420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installation Wheel Kit Installation Wheel Kit Installation If the server will be configured stand alone, install the included wheel kit. Compare the packing list with the contents of the wheel kit before beginning the installation. Table 2-1 Wheel Kit Packing List Part Number A9904-04002 A9904-04007 A9904-04008 A9904-04009 A6093-04082 A6093-04083 A6093-04084 A6093-04085 0515-2478 A6093-44013 Not Applicable Description Quantity Caster Cover 2 Right Side Cover 1 Left Side Cover 1 Top Cover 1 Right Front Caster Assembly 1 Right Rear Caster Assembly 1 Left Front Caster Assembly 1 Left Rear Caster Assembly 1 M4 x 0.7 8mm T15 Steel Zinc 8 Machine Screw (used to attach each caster to the chassis) Plywood Unloading Ramp 1 Phillips Head Wood Screw (used to 2 attach the ramp to the pallet) Tools Required for Installation The listing below outlines the tools required to install the wheel kit. • Diagonal side cutters • Safety glasses • Torx driver with T-15, T-25 bits • Phillips head screwdriver WARNING Wear protective glasses while cutting the plastic bands around the shipping container. These bands are under tension. When cut, they can spring back and cause serious eye injury. 32 Chapter 2