HP t530 Hardware Reference Guide - Page 10

Attaching the stand

Get HP t530 PDF manuals and user guides View all HP t530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Attaching the stand CAUTION: Unless the thin client is mounted with the HP Quick Release, it must be operated with the stand attached to ensure proper airflow around the thin client. Installing the stand The thin client can be used in either a tower or horizontal orientation with the stand included with the thin client. 1. Remove/disengage any security devices that prohibit opening the thin client. 2. Remove all removable media, such as USB flash drives, from the thin client. 3. Turn off the thin client properly through the operating system, and then turn off any external devices. 4. Disconnect the AC power cord from the AC outlet and disconnect any external devices. 5. Attach the stand to the thin client. ● Attach the stand to the bottom of the thin client to use the thin client in the tower orientation. a. Turn the thin client upside down and locate the two screw holes in the grid on the bottom of the thin client. b. Position the stand over the bottom of the thin client and line up the captive screws in the stand with the screw holes in the thin client. c. Tighten the captive screws securely. ● Attach the stand to the right side of the thin client to use it in the horizontal orientation. a. Lay the thin client down with the right side up and the front side with the HP logo facing you. 4 Chapter 1 Hardware Reference

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Attaching the stand
CAUTION:
Unless the thin client is mounted with the HP Quick Release, it must be operated with the stand
attached to ensure proper airflow around the thin client.
Installing the stand
The thin client can be used in either a tower or horizontal orientation with the stand included with the thin
client.
1.
Remove/disengage any security devices that prohibit opening the thin client.
2.
Remove all removable media, such as USB flash drives, from the thin client.
3.
Turn off the thin client properly through the operating system, and then turn off any external devices.
4.
Disconnect the AC power cord from the AC outlet and disconnect any external devices.
5.
Attach the stand to the thin client.
●
Attach the stand to the bottom of the thin client to use the thin client in the tower orientation.
a.
Turn the thin client upside down and locate the two screw holes in the grid on the bottom of
the thin client.
b.
Position the stand over the bottom of the thin client and line up the captive screws in the
stand with the screw holes in the thin client.
c.
Tighten the captive screws securely.
●
Attach the stand to the right side of the thin client to use it in the horizontal orientation.
a.
Lay the thin client down with the right side up and the front side with the HP logo facing you.
4
Chapter 1
Hardware Reference