HP t530 Hardware Reference Guide - Page 30
Save Changes and Exit, Ignore Changes and Exit, Apply Defaults and Exit
View all HP t530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys to select the option you want, then press enter. To return to the Computer Setup Utilities menu, press esc. 6. To apply and save changes, select File > Save Changes and Exit. ● If you have made changes that you do not want applied, select Ignore Changes and Exit. ● To reset to factory settings, select Apply Defaults and Exit. This option will restore the original factory system defaults. CAUTION: Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Heading File Storage Security Power Advanced Table Computer Setup-File on page 25 Computer Setup-Storage on page 26 Computer Setup-Security on page 27 Computer Setup-Power on page 28 Computer Setup-Advanced on page 29 24 Chapter 2 Troubleshooting