HP t530 Hardware Reference Guide - Page 11

Tighten the captive screws securely., with the screw holes in the thin client.

Get HP t530 PDF manuals and user guides View all HP t530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

b. Press the left side (1) of the side cover down, and then lift the side cover (2) off the thin client. NOTE: Retain the side cover for possible future use. c. Lay the thin client down with the right side up and locate the two screw holes in the grid on the right side of the thin client. d. Position the stand over the side of the thin client and line up the captive screws in the stand with the screw holes in the thin client. e. Tighten the captive screws securely. 6. Reconnect the AC power cord and then turn the thin client on. NOTE: Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the thin client remain clear and free of obstructions. 7. Lock any security devices that were disengaged when the thin client cover or access panel was removed. Setup 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
b.
Press the left side (1) of the side cover down, and then lift the side cover (2) off the thin client.
NOTE:
Retain the side cover for possible future use.
c.
Lay the thin client down with the right side up and locate the two screw holes in the grid on
the right side of the thin client.
d.
Position the stand over the side of the thin client and line up the captive screws in the stand
with the screw holes in the thin client.
e.
Tighten the captive screws securely.
6.
Reconnect the AC power cord and then turn the thin client on.
NOTE:
Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the thin client remain
clear and free of obstructions.
7.
Lock any security devices that were disengaged when the thin client cover or access panel was removed.
Setup
5