Home » HP Manuals » Desktops » HP t530 » Manual Viewer

HP t530 Hardware Reference Guide - Page 15

Supported mounting options, CAUTION

Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

6. Slide the side of the mounting device attached to the thin client (1) over the other side of the mounting device (2) on the device on which you want to mount the thin client. An audible 'click' indicates a secure connection. CAUTION: To ensure proper function of the HP Quick Release and a secure connection of all components, make sure both the release lever on one side of the mounting device and the rounded opening on the other side face upward. NOTE: When attached, the HP Quick Release automatically locks in position. You only need to slide the lever to one side to remove the thin client. Supported mounting options The following illustrations demonstrate some of the supported mounting options for the mounting bracket. ● On the back of a monitor: Setup 9

Section	Page
Hardware Reference	7
Product features	7
Components	8
Serial number location	8
Setup	9
Warnings and cautions	9
Attaching the stand	10
Installing the stand	10
Connecting the AC power cord	12
Securing the thin client	12
Mounting and orienting the thin client	13
HP Quick Release	13
Supported mounting options	15
Supported orientation and placement	17
Non-supported placement	18
Routine thin client care	19
Hardware changes	19
Warnings and cautions	19
Removing and replacing the access panel	20
Removing the access panel	20
Replacing the access panel	22
Locating internal components	23
Replacing the M.2 storage module	24
Removing and replacing the battery	25
Upgrading system memory	27
Installing a memory module	27
Troubleshooting	29
Computer Setup (F10) Utility, BIOS Settings	29
Computer Setup (F10) Utilities	29
Using Computer Setup (F10) Utilities	29
Computer Setup—File	31
Computer Setup—Storage	32
Computer Setup—Security	33
Computer Setup—Power	34
Computer Setup—Advanced	35
Changing BIOS Settings from the HP BIOS Configuration Utility (HPBCU)	36
Updating or restoring a BIOS	38
Diagnostics and troubleshooting	39
LEDs	39
Wake-on LAN	39
Power-On Sequence	40
Resetting the Setup and Power-on passwords	40
Power-on diagnostic tests	40
Interpreting POST diagnostic front panel LEDs and audible codes	41
Troubleshooting	43
Basic troubleshooting	43
Diskless (No-Flash) unit troubleshooting	44
Configuring a PXE server	45
Using HP ThinUpdate to restore the image	45
Device management	46
Using HP PC Hardware Diagnostics (UEFI)	46
Downloading HP PC Hardware Diagnostics (UEFI) to a USB device	47
Power cord set requirements	47
General requirements	47
Japanese power cord requirements	48
Country-specific requirements	48
Statement of Volatility	48
Specifications	50
Electrostatic discharge	52
Preventing electrostatic damage	52
Grounding methods	52
Shipping information	53
Shipping preparation	53
Important service repair information	53
Accessibility	54
Supported assistive technologies	54
Contacting support	54

Match case Limit results 1 per page

Slide the side of the mounting device attached to the thin client (1) over the other side of the mounting

device (2) on the device on which you want to mount the thin client. An audible 'click' indicates a secure

connection.

CAUTION:

To ensure proper function of the HP Quick Release and a secure connection of all components,

make sure both the release lever on one side of the mounting device and the rounded opening on the other

side face upward.

NOTE:

When attached, the HP Quick Release automatically locks in position. You only need to slide the lever

to one side to remove the thin client.

Supported mounting options

The following illustrations demonstrate some of the supported mounting options for the mounting bracket.

●

On the back of a monitor:

Setup