HP wp110 HP Wireless Print Server wp110 - (English) Configuration Guide - Page 15
Setup, Wireless, of the AirPort base station, Enable Shared Key, Disable
View all HP wp110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4. Select Setup > Wireless to open the Wireless Configurations screen. 5. Set the following options: a. Choose Network: select the name of the AirPort base station b. Channel: no action needed If WEP is used, select the WEP Req to Enable (Shared Key). Then set the WEP Key by entering either the Default Key or a Passphrase for the base station. Note See page 10 for instructions on setting appropriate WEP values in the AirPort Admin Utility. If WEP is not used, select the following options: - WEP Req: Disable - WEP Key: no action needed. 6. Click OK. The notification message screen appears. 7. Click OK. The print server is set to the networking mode. 8. Establish TCP/IP settings (OS X only). 11
11
4.
Select
Setup
>
Wireless
to open the
Wireless Configurations screen.
5.
Set the following options:
a.
Choose Network: select the
name
of the AirPort base station
b.
Channel:
no action needed
If WEP is used, select the WEP Req to
Enable (Shared Key)
.
Then
s
et the
WEP
Key
by entering either the Default Key
or a Passphrase for the base station.
Note
See page 10 for instructions on
setting appropriate WEP values in the
AirPort Admin Utility.
If WEP is not used, select the
following options:
–
WEP Req:
Disable
–
WEP Key:
no action needed
.
6.
Click
OK.
The notification message screen
appears.
7.
Click
OK
.
The print server is set to the
networking mode.
8.
Establish TCP/IP settings (OS X only).