HP wp110 HP Wireless Print Server wp110 - (English) Configuration Guide - Page 22

The Print Server Configuration Page lists the following information about your print server: Mac Address - your print server's unique hardware number, the MAC (Media Access Control) address. SNMP - shows whether SNMP community names (passwords) have been "Set" FLASH-ROM - the firmware version and date BOOT-ROM - device boot code version TCP/IP - the IP address and associated settings AppleTalk Settings - a list of current AppleTalk settings Wireless Settings - WLAN settings in accordance with the IEEE 802.11b standard Current Status - information about the attached printer and connectivity. Link Status shows the state of the last packet received. Network Statistics - network traffic statistics Shown here is an example of a print server configured in infrastructure mode. If a Print Server Configuration Page does not print, see page 19. Print Server Configuration Mac Address FLASH-ROM Version Build Date BOOT-ROM Version Build Date : 00306E0D699E : 0036 : 2001-07-24 : 0101 : 2001-01-29 1. TCP/IP settings IP Address : 192.168.2.163 Subnet mask : 255.255.255.0 Default Gateway : 192.168.2.1 RARP : Disable BOOTP : Disable DHCP : Enable ARP + PING : Enable 2. AppleTlak Settings Status : Enable Printer : npi0396D3.LaserJet 1220 Zone : (deafult zone) 3. SNMP settings Set Communicty Name : (not_set) 4. Wireless settings Connection Mode : Infrastructure WEP Request : 40Bit Enable(Shared Key) SSID : iIPS-TM Fragmentation Thresh.: 2346 RTS Threshold :0 Tx Rate : Auto Country Code :2 5. Current Status Connection Status : Connected(Infrastructure) Link Status : Excellent Current Channel :3 Current Datarate : 2 (Mbps) Parallel Port Mode : ECP Mode Printer Manufacturer : Hewlett-Packard Printer Model : HP LaserJet 1220 6. Network Statistics Unicast Packets Rcvd.: 2 Total Packets Rcvd. : 72 Packets Transmitted : 19 END OF PRINTOUT 18