HP xp7030 User Guide - Page 41

Insert the new lamp module into the projector and tighten the two screws.

Get HP xp7030 - Digital Projector PDF manuals and user guides View all HP xp7030 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

4. Loosen the two screws in the lamp cover 1 and remove the cover 2. 5. Remove the two screws 3 from the lamp module, raise the handle 4, and lift out the module 5. 6. Insert the new lamp module into the projector and tighten the two screws. 7. Replace the lamp cover and tighten the two screws. 8. Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp. 9. Press enter, go to Setup > Advanced setup > Reset lamp hours, and press enter. Performing routine maintenance 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
Performing routine maintenance
41
4.
Loosen the two screws in the lamp cover
1
and remove the cover
2
.
5.
Remove the two screws
3
from the lamp module, raise the handle
4
, and lift out the
module
5
.
6.
Insert the new lamp module into the projector and tighten the two screws.
7.
Replace the lamp cover and tighten the two screws.
8.
Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling
the lamp.
9.
Press
enter
, go to
Setup > Advanced setup > Reset lamp hours
, and press
enter
.