HP xp7030 User Guide - Page 52

Audio functions Command MUTE VOL INTSP Parameters Description 0, 1, ? Sets or queries audio muting: 0=not muted, 1=muted. 0 to 31, +, -, ? Sets or queries audio volume: 0=off, 31=maximum. 0, 1, ? Sets or queries usage of the internal speaker (certain models only): 0=disabled, 1=enabled. Setup functions Command LANG Parameters 0 to 10, ? LSAV LHRS THRS POS TMO PTMO EDGE VERS 0, 1, ? ? ? 0 to 3, ? 5 to 120, ? 0, 3 to 6, ? 0, 1, ? ? Description Sets or queries the language used by the projector: 0=English, 1=French, 2=Italian, 3=German, 4=Portuguese, 5=Spanish, 6=Traditional Chinese, 7=Simplified Chinese, 8=Korean, 9=Japanese, 10=Czech. Sets or queries low-power operating mode: 0=normal power, 1=low power. Queries the time (in tenths of hours) that the lamp has been in use. Queries the total time (in tenths of hours) that the projector has been in use. Sets or queries the projector's position: 0=front table, 1=front ceiling, 2=rear table, 3=rear ceiling. Sets or queries the menu timeout setting (seconds) Sets or queries the power timeout: 0=never, 3=15 min, 4=30 min, 5=60 min, 6=120 min. Sets or queries the cleaning of noise from edges of image: 0=no cleaning, 1=cleaning. Queries the projector model number and firmware version. The notification takes this form: *VERS="proj_model:proj_fw" 52 Installing Permanently