HP xp7030 User Guide - Page 51

Video functions (continued) Command Parameters Description TNT -45 to 45, +, -, ? Sets or queries the tint. RADJ -50 to 50, +, -, ? Sets or queries the amount of red. GADJ -50 to 50, +, -, ? Sets or queries the amount of green. BADJ -50 to 50, +, -, ? Sets or queries the amount of blue. CTMP 0 to 2, ? Sets or queries the color temperature: 0=warm, 1=neutral, 2=cool. SHRP 0 to 12, +, -, ? Sets or queries the sharpness. PENH 0 to 6, +, -, ? Sets or queries the picture enhancement setting. KEYV -50 to 50, +, -, ? Sets or queries the vertical keystone: 0=no keystone adjustment, 1 to 50=shrinks the top of the display, -1 to -50=shrinks the bottom of the display. ASPT 0, 1, 4, ? Sets or queries the aspect ratio: 0=1-to-1, 1=Best Fit, 4=Reduced. SYNC None Automatically resynchronizes the projector to the active computer input source. FREQ -50 to 50, +, -, ? Sets or queries the projector's timing relative to the active computer input source. TRK value, +, -, ? Sets or queries the synchronization of the projector to the active computer input source. VPOS value, +, -, ? Sets or queries the vertical positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source. HPOS value, +, -, ? Sets or queries the horizontal positioning of the projected image: usable range is the maximum and minimum allowed by the active computer input source. HIDE 0, 1, ? Sets or queries picture blanking: 0=not hidden, 1=hidden. WIDE 0, 1, ? Sets or queries wide screen mode: 0=normal, 1=wide. KEYR None Resets keystone to zero. Connecting to a room controller 51