HP xw3400 HP xw3400 Workstation - Setup and Troubleshooting Guide - Page 8

Ventilation, COA label, and serial number label information,

Get HP xw3400 - Workstation PDF manuals and user guides View all HP xw3400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Ventilation, COA label, and serial number label information Proper ventilation for your system is very important. Refer to the notes and illustrations below to properly position your system for maximum airflow: ● Operate the workstation on a sturdy, level surface. ● Place the workstation in an area that is relatively cool with adequate ventilation. Provide at least 6 inches of clearance at the front and back of the workstation. For cabinet installation, ensure adequate cabinet ventilation and ensure that the ambient temperature within the cabinet does not exceed 35 degrees Celsius (95 degrees Fahrenheit). ● Never restrict the incoming or outgoing airflow of the workstation by blocking any vents or air intakes. Figure 1-2 Workstation ventilation Each HP Workstation has two unique serial number labels (1) and a Certificate of Authentication (COA) label (2, for Microsoft® Windows®-preinstalled systems only), as shown in the picture above. The serial number labels can be found on the top panel of the unit. Keep this number available when contacting customer service for assistance. The COA label is generally located on the top panel of the unit near the serial number label. NOTE: If Microsoft Windows was preloaded on your workstation and must later be restored with Windows OEM CDs (installing without using the Restore Plus! CDs), you will need to call Microsoft in order to provide the company with a Stock Keeping Unit (SKU) number. The SKU information is on the service tag and is the OS product number in the lower right hand section of the tag. It should say "OS: XXXXXXX" where the "XXXXXXX" is the OS product number. 2 Chapter 1 Quick setup & getting started ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
Ventilation, COA label, and serial number label information
Proper ventilation for your system is very important. Refer to the notes and illustrations below to properly
position your system for maximum airflow:
●
Operate the workstation on a sturdy, level surface.
●
Place the workstation in an area that is relatively cool with adequate ventilation. Provide at least 6
inches of clearance at the front and back of the workstation. For cabinet installation, ensure
adequate cabinet ventilation and ensure that the ambient temperature within the cabinet does not
exceed 35 degrees Celsius (95 degrees Fahrenheit).
●
Never restrict the incoming or outgoing airflow of the workstation by blocking any vents or air
intakes.
Figure 1-2
Workstation ventilation
Each HP Workstation has two unique serial number labels (
1
) and a Certificate of Authentication (COA)
label (
2
, for Microsoft® Windows®-preinstalled systems only), as shown in the picture above. The serial
number labels can be found on the top panel of the unit. Keep this number available when contacting
customer service for assistance. The COA label is generally located on the top panel of the unit near
the serial number label.
NOTE:
If Microsoft Windows was preloaded on your workstation and must later be restored
with Windows OEM CDs (installing without using the
Restore Plus!
CDs), you will need to call
Microsoft in order to provide the company with a Stock Keeping Unit (SKU) number. The SKU
information is on the service tag and is the OS product number in the lower right hand section of
the tag. It should say “OS: XXXXXXX” where the “XXXXXXX” is the OS product number.
2
Chapter 1
Quick setup & getting started
ENWW