Hikvision DS-KH6320-WTE1 Configuration Guide - Page 11
Activation, 2.1 Activate via iVMS-4200 Client Software, via iVMS-4200 Client - password
View all Hikvision DS-KH6320-WTE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Network Indoor Station Configuration Guide Chapter 2 Activation 2.1 Activate via iVMS-4200 Client Software You can only configure and operate the indoor station after creating a password for the device activation. Before You Start Default parameters of indoor station are as follows: ● Default IP Address: 192.0.0.64. ● Default Port No.: 8000. ● Default User Name: admin. Steps 1. Run the client software, enter Device Management, check the Online Device area. 2. Select an inactivated device and click the Activate. 3. Create a password, and confirm the password. Note We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. 4. Click OK to activate the device. 2